Wet Processing
Jet Products is capable of performing various wet process coatings in our modern certified NADCAP approved facility. Please see our "Process Approvals" page for detailed specification and certification information.
Anodize
Jet products can perform anodic treatment of aluminum and aluminum alloys per MIL-A-8625, type I, Type II, and Type III, both natural and dyed. Our new processing facility is staffed by qualified platers, part rackers and precision maskers. The bath size is 4 ft./Sq., and we are equipped to handle all the aluminum's including the 200/2000 series alloys and K01.
Chromic Anodize, Known As Type I
This anodizing entails the immersion of aluminum parts is a Chromic bath. follow by sealing. This coating provides very good corrosion resistance with minimum build up. This treatment also enhances the adhesion for adhesive bonding and coatings
Sulfuric Color Anodize, Know As Type II
This anodizing entails the immersion of aluminum parts in an electrolyte where an electric current is passed through the part. The surface is converted to aluminum oxide. Proper formation of aluminum oxide provides very good resistance to corrosion and abrasion. In addition it serves as a base for color absorption when dyes are used or improve adhesion for sprayed coatings
Hard Anodize Known As Type III
Jet Products hard-coat anodizing entails the immersion of aluminum parts in an electrolyte bath charged with proprietary additive. Jet products Hardcoat process produces superior hardness and denseness when a part is hard-coated, it increases the micro finish 2-5 times, depending on the alloy. This hard-coat anodizing exceeds wear characteristics of other hard coatings such as electroless nickel, and hardchrome. The used of our hard-coat for salvage operations has proven very successful. Parts rejected because of bores that have been machined oversized are being hard-coated and honed to become acceptable parts.
Chemical Conversion Treatments
Jet Products is ready to handle all your Chem conversion needs. Most common MIL-C-5541, Class 1A and Class 3. Parts are first carefully degreased/cleaned, follow by light etch cleaning, customer requirements, etched using the appropriate etchant for the particular alloy. Parts are next de-oxidized, followed by the required chemical conversion coating, then thoroughly rinsed. A hot deionized water seal completes the process, and the parts are dried, inspected and ready to be returned to the customer.
Capabilities and capacities
Jet Products stands ready to meet the diverse requirements of our customers. Our experienced staff is available to answer any questions you might have, and is prepared to work with you to satisfying all your processing needs. Call us or e-mail with your processing requirements.
